Between Dogs
Groom Room

Remove all visible hair and debris from the grooming table or paw mat used.

Spray the surface with OdoBan and wipe thoroughly to clean away hair, residue, and product buildup.

Spray with 256 disinfectant to sanitize.

Allow to sit for at least 10 minutes for full contact time.

If the surface is still wet afterward, wipe dry with a clean towel before the next dog.

Remove any visible hair, product, or debris from grooming arms and non-fabric loops.

Spray all contact areas thoroughly with 256 disinfectant, ensuring full coverage.

Allow the disinfectant to sit for at least 10 minutes to sanitize completely.

After the dwell time, if the surface is still wet, wipe dry with a clean towel — otherwise, allow to air dry before use.

After finishing each dog, remove the fabric loop from the grooming arm.

Place the used loop in the UV oven for disinfection before it can be reused.

Replace it with a clean, sanitized loop from the storage area.

For fabric Groomers Helpers and belly bands:
Spray with 256 disinfectant after each use, ensuring full coverage.
Allow to sit for 10 minutes for complete contact time.
Wipe dry if still wet or allow to air dry.
At the end of the day, place all fabric Helpers and belly bands in the UV oven for final sanitation

Remove all visible loose hair from the grooming table, tools, and paw mat.

Use a hand brush or towel to wipe remaining hair off surfaces and out of crevices.

Sweep or vacuum around the grooming station to remove all hair from the floor and under the table.

Dispose of collected hair in the trash before continuing to the next cleaning step.

Remove all loose hair from tools such as combs, brushes, clipper bodies, and blades.
Use a small cleaning brush to get into seams, vents, and clipper guards.

Spray all tool surfaces that came into contact with the dog using 99% isopropyl alcohol.
Ensure full coverage of comb teeth, brush bristles, and clipper guards.

Allow the alcohol to sit for 5 minutes to disinfect.

After 5 minutes, wipe each tool dry with a clean towel or disposable wipe.

Return tools to their designated clean storage area.