Between Dogs
Bathing Area

Rinse the tub walls and bottom with clean water to loosen and wash away hair.

Use the water flow and sprayer to help move hair toward the drain area.

Once rinsed, check the drain and remove any trapped hair or debris by hand.

Wipe any remaining hair from the sides or edges with a towel if needed.

Turn on the water and rinse all interior surfaces of the tub, including the walls, corners, and floor.

Use the sprayer to flush away all shampoo, conditioner, and debris left from the previous dog.

Direct the water flow toward the drain to help carry residue away.

Continue rinsing until there are no visible suds, hair, or dirt remaining.

Spray all touch points — tub edges, faucet handles, and sprayer handle — thoroughly with 256 disinfectant.

Ensure full coverage of all frequently touched areas.

Allow disinfectant to sit for 10 minutes to complete the sanitation contact time.

After 10 minutes, rinse surfaces with clean water to remove any residue before placing the next dog in the tub.

Return all shampoo and conditioner bottles to their designated shelves or stations.

Make sure labels face forward and bottles are free of drips or residue.

Return sanitized tools to their correct storage area or holder.

Ensure everything is arranged neatly and ready for the next groom.