End of Day
Groom Room

How To

• Remove all hair and debris from grooming tables.

• Spray surfaces with OdoBan and wipe clean.

• Spray with 256 disinfectant, ensuring full coverage.

• Allow to sit for 10 minutes to sanitize.

• Wipe dry if still wet afterward.

How To

• Remove visible hair or residue from arms and loops.

• Spray with 256 disinfectant, ensuring complete coverage.

• Allow 10-minute dwell time, then wipe or let air-dry.

• Inspect loops for wear or fraying and replace as needed.

How To

• Remove hair from all tools (combs, brushes, scissors, clipper bodies, and blades).

• Spray 99% alcohol directly onto tools, ensuring full coverage.

• Let sit for 5 minutes to disinfect.

• Wipe dry with a clean towel and return to the designated “clean tools” area.

How To

• Collect all fabric loops used throughout the day.
  Place in UV oven for full sanitation before next use.

• Spray fabric Groomers Helpers and belly bands with 256 disinfectant.
  Let sit for 10 minutes, then hang to dry.

• At the end of the day, place them in the UV oven for final disinfection.

How To

• Load UV oven with all tools and fabric restraints scheduled for disinfection.

• Close the door securely and power it on.

• Allow the full UV sanitation cycle to complete before turning off.

How To

• Sweep large hair piles first to prevent clogging the vacuum.

• Use the central vacuum from the bathing/drying area:
  Long flat head with brushes for general cleaning.
  Direct hose (no head) for edges and under tables.

• After vacuuming, mop the floor with OdoBan solution.

• Allow to air-dry overnight.

How To

• Spray glass cleaner or 99% alcohol onto a clean towel (not directly on the mirror to avoid streaks).

• Wipe the mirror gently, focusing on dog drool, sneeze marks, or fingerprints.

• Use a dry side of the towel to buff to a clear shine.

• Check for streaks from multiple angles and re-wipe if needed.