Weekly Cleaning
Bathing Area

Remove all bottles, sprayers, and storage items from tub ledges and product shelves.

Spray OdoBan to remove soap, product buildup, and hair.

Wipe surfaces completely clean.

Spray with 256 disinfectant, ensuring full coverage.

Allow to sit for 10 minutes, then return bottles with labels facing forward and shelves organized by category.

Remove all hair and debris from paw mats.

Apply Dawn dish soap directly to the mat surface.

Scrub thoroughly using the Yuppie Puppy brush to loosen grime.

Rinse with warm water until clear.

Spray with 256 disinfectant and let sit for 10 minutes, then hang to dry completely.

Remove items from counters and wipe all surfaces with OdoBan to remove splashes or buildup.

Spray 256 disinfectant on walls, switches, and touch zones.

Allow to sit for 10 minutes, then wipe dry or let air-dry.

Clean tubs with OdoBan and rinse thoroughly.

Dry with a microfiber towel.

Apply stainless steel polish to faucets and exterior tub surfaces.

Buff with a clean, dry towel to a shine.

Apply Dawn dish soap directly to loops.

Scrub thoroughly with a small brush or cloth to remove buildup.

Rinse completely under warm water.

Spray with 256 disinfectant and let sit 10 minutes.

Hang to air-dry before next use.

Check OdoBan, 256, alcohol, paper towels, and cloth towels.

Wipe shelves and refill bottles or rags as needed.

Organize products with labels facing forward.

Check all shampoos, conditioners, and specialty products for low levels.

Top off bottles from bulk containers.

Wipe exterior of each bottle with OdoBan before placing back on shelves.

Organize by category with labels facing forward.

Rinse bottles thoroughly with warm water to remove leftover shampoo or conditioner.

Shake out excess water and dry exterior.

Place in UV oven and run a full sanitation cycle.

When finished, remove bottles and store upside-down to air-dry.